Oregon Stormwater 30 PDH Discount Package 2
Courses in this Package
Stormwater Best Management Practice Design: Overview (C06-004)
Stormwater Best Management Practice Design: Basins (C08-008)
Construction Site Storm Water - Erosion Control (C03-001)
Construction Site Storm Water Control (Comprehensive) (C09-001)
Introduction to NPDES Construction Site General Permit (C04-003)
This online engineering PDH course provides an overview of wet weather flow impacts on receiving waters, regulations that impact stormwater BMP design, design concepts and BMP types and selection.
The goals and objectives of best management practice (BMP) for stormwater management are as diverse as the situations to which they are applied.
This 6 PDH online course is applicable to civil and geotechnical engineers, site developers, and contractors as well as design and construction personnel involved with the planning and design of stormwater systems.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Wet weather flow impacts including physical, chemical and biological
- Overview of Federal, State and Municipal regulations
- BMP performance goals and objectives
- Hydrologic concepts
- Peak discharge control strategies
- Water quality control strategies
- BMP types and selection
- Watershed and other factors influencing stormwater management decisions
In this professional engineering CEU course, you need to review Sections 1 through 5 of the US Environmental Protection Agency (EPA) Publication EPA/600/R-04/121, "Stormwater Best Management Practice Design Guide: Volume 1 General Considerations".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course provides design guidance for basin or pond BMPs including dry detention basins, wet/retention ponds and infiltration basins. The objectives are to create stormwater management BMPs that maximize the removal of pollutants and provide a certain measure of flood control.
The goals and objectives of best management practice (BMP) for stormwater management are as diverse as the situations to which they are applied.
This 8 PDH online course is applicable to civil and geotechnical engineers, site developers, and contractors as well as design and construction personnel involved with the planning and design of stormwater systems.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Overview of basins and ponds
- Discussion of selection factors and considerations
- Design criteria and analysis procedures for dry detention basins
- Design criteria and analysis procedures for wet/retention ponds
- Design criteria and analysis procedures for infiltration basins
- Review of construction specifications
- Guidance on inspection, maintenance and operational issues
In this professional engineering CEU course, you need to review Sections 1 through 7 of the US Environmental Protection Agency (EPA) Publication EPA/600/R-04/121B, "Stormwater Best Management Practice Design Guide: Volume 3 Basin Best Management Practices".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course presents EPA's control measures to minimize erosion at construction sites due to higher peak flow rates, increased flooding, etc.
Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.
EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on
This 3 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of erosion controls for storm water runoff from construction sites.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Types and methods of erosion control systems
- Applicability
- Siting and design criteria
- Maintenance and cost considerations
- Effectiveness and limitations
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to the “Erosion Control” section of the “Construction Site Storm Water Runoff Control”. This section of the BMP addresses the following erosion control methods:
- Chemical Stabilization
- Mulching
- Permanent Seeding
- Sodding
- Soil Roughening
- Geotextiles
- Gradient Terraces
- Soil Retention
- Temporary Slope Drain
- Temporary Stream Crossings
- Vegetated Buffer
- Construction Sequencing
- Dust Control
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the “Erosion Control” section of this EPA publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course explains how to prevent erosion due to site stormwater runoff from affecting the aquatic life and hydraulic characteristics of water.
Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.
EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on
This 9 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of runoff controls for storm water runoff from construction sites.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Types and methods of runoff control systems
- Applicability
- Siting and design criteria
- Maintenance and cost considerations
- Effectiveness and limitations
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to “Construction Site Storm Water Runoff Control”. This BMP addresses the following:
- Runoff Control
- Erosion Control
- Sediment Control
- Good Housekeeping
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 9 PDH credits. The quiz will be based on this EPA publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course introduces the reader to the National Pollutant Discharge Elimination System (NPDES) construction general permit (CGP). The NPDES regulations apply to nearly every construction site development. Understanding the regulations, requirements, and coverage provided under the CGP is essential to staying in compliance with the law. Following the requirements under the CGP will also reduce the impacts of construction on the environment.
Construction inevitably causes some degree of disturbance and compaction of the soil, the loss of vegetation density, and the creation of impervious surfaces. Water quality can be dramatically impacted by inadequate construction site erosion and sediment control measures. For these reasons the Environmental Protection Agency regulates even relatively small construction sites under the Phase II NPDES regulations.
"Any construction activity that will, or is part of a "common plan" of development or sale that will, disturb one or more acres and has the potential to have a discharge of storm water to a water of the United States must either have a permit OR have qualified for a waiver. If all of the storm water from the construction activity is captured on-site and allowed to evaporate, soak into the ground on-site, or is used for irrigation, you do not need coverage under this permit. Under the Clean Water Act, it is illegal to have a point source discharge of pollutants to a water of the United States that is not authorized by a permit. If there is a potential for a discharge, you need to apply for coverage under this permit." (EPA Fact Sheet, 2005).
This 4 PDH online course is applicable to practicing engineers, contractors, developers, regulators, and all other personnel involved with construction sites.
This PE ccontinuing education ourse is intended to provide you with the following specific knowledge and skills:
- Understanding of the general history of the NPDES regulations
- Knowing when a permit is required
- Determining if a project eligible for a CGP
- Learning what coverage is provided by the permit
- Understanding the requirements under the permit
- Familiarizing with sources of additional information
In this professional engineering CEU course, you need to review the EPA Fact Sheet, 2005 "NPDES General Permit for Storm Water Discharges from Construction Activities".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.