Ohio Stormwater and Ethics 30 PDH Discount Package 2
Courses in this Package
Stormwater Best Management Practice Design: Overview (C06-004)
Stormwater Best Management Practice Design: Basins (C08-008)
Construction Site Storm Water Control (Comprehensive) (C09-001)
Construction Site Storm Water - Good Housekeeping (C02-003)
Construction Site Storm Water - Erosion Control (C03-001)
Ethics in Professional Practice (LE2-007)
This online engineering PDH course provides an overview of wet weather flow impacts on receiving waters, regulations that impact stormwater BMP design, design concepts and BMP types and selection.
The goals and objectives of best management practice (BMP) for stormwater management are as diverse as the situations to which they are applied.
This 6 PDH online course is applicable to civil and geotechnical engineers, site developers, and contractors as well as design and construction personnel involved with the planning and design of stormwater systems.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Wet weather flow impacts including physical, chemical and biological
- Overview of Federal, State and Municipal regulations
- BMP performance goals and objectives
- Hydrologic concepts
- Peak discharge control strategies
- Water quality control strategies
- BMP types and selection
- Watershed and other factors influencing stormwater management decisions
In this professional engineering CEU course, you need to review Sections 1 through 5 of the US Environmental Protection Agency (EPA) Publication EPA/600/R-04/121, "Stormwater Best Management Practice Design Guide: Volume 1 General Considerations".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course provides design guidance for basin or pond BMPs including dry detention basins, wet/retention ponds and infiltration basins. The objectives are to create stormwater management BMPs that maximize the removal of pollutants and provide a certain measure of flood control.
The goals and objectives of best management practice (BMP) for stormwater management are as diverse as the situations to which they are applied.
This 8 PDH online course is applicable to civil and geotechnical engineers, site developers, and contractors as well as design and construction personnel involved with the planning and design of stormwater systems.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Overview of basins and ponds
- Discussion of selection factors and considerations
- Design criteria and analysis procedures for dry detention basins
- Design criteria and analysis procedures for wet/retention ponds
- Design criteria and analysis procedures for infiltration basins
- Review of construction specifications
- Guidance on inspection, maintenance and operational issues
In this professional engineering CEU course, you need to review Sections 1 through 7 of the US Environmental Protection Agency (EPA) Publication EPA/600/R-04/121B, "Stormwater Best Management Practice Design Guide: Volume 3 Basin Best Management Practices".
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course explains how to prevent erosion due to site stormwater runoff from affecting the aquatic life and hydraulic characteristics of water.
Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.
EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on
This 9 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of runoff controls for storm water runoff from construction sites.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Types and methods of runoff control systems
- Applicability
- Siting and design criteria
- Maintenance and cost considerations
- Effectiveness and limitations
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to “Construction Site Storm Water Runoff Control”. This BMP addresses the following:
- Runoff Control
- Erosion Control
- Sediment Control
- Good Housekeeping
Once you complete your course review, you need to take a multiple-choice quiz consisting of forty (40) questions to earn 9 PDH credits. The quiz will be based on this EPA publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course describes the types and methods of construction site housekeeping practices, applicability, maintenance and cost considerations.
Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.
EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on
This 2 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of good housekeeping practices for storm water runoff from construction sites.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Types and methods of construction site good housekeeping practices
- Applicability
- Siting and design criteria/implementation
- Maintenance and cost considerations
- Effectiveness and limitations
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to the “Good Housekeeping” section of the “Construction Site Storm Water Runoff Control”. This section of the BMP addresses the following “Good Housekeeping” methods:
- General Construction Site Waste Management
- Spill Prevention and Control Plan
- Vehicle Maintenance and Washing Areas
- Contractor Certification and Inspector Training
- Construction Reviewer
- BMP Inspection and Maintenance
- Model Ordinances
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on the “Good Housekeeping” section of this EPA publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
This online engineering PDH course presents EPA's control measures to minimize erosion at construction sites due to higher peak flow rates, increased flooding, etc.
Erosion and sedimentation related to construction site storm water runoff can significantly affect the aquatic population and hydraulic characteristics of the receiving waters. Alterations in hydraulic characteristics of streams receiving runoff include higher peak flow rates, increased frequency and duration of bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels.
EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on
This 3 PDH online course is applicable to municipality owners and/or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of erosion controls for storm water runoff from construction sites.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
- Types and methods of erosion control systems
- Applicability
- Siting and design criteria
- Maintenance and cost considerations
- Effectiveness and limitations
In this professional engineering CEU course, you need to review EPA’s Best Management Practice relating to the “Erosion Control” section of the “Construction Site Storm Water Runoff Control”. This section of the BMP addresses the following erosion control methods:
- Chemical Stabilization
- Mulching
- Permanent Seeding
- Sodding
- Soil Roughening
- Geotextiles
- Gradient Terraces
- Soil Retention
- Temporary Slope Drain
- Temporary Stream Crossings
- Vegetated Buffer
- Construction Sequencing
- Dust Control
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 3 PDH credits. The quiz will be based on the “Erosion Control” section of this EPA publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.
In this online engineering PDH course, background on the philosophical models that guide ethical behavior is discussed and then applied to specific situations in engineering codes of ethics. This course is based on the American Society of Mechanical Engineers Professional Practice Curriculum, Volume 8, Section: Engineering Ethics.
Many engineering organizations have drafted codes of ethics to which their members are required to commit. Generally, these codes are quite similar and are based on a few fundamental principles which provide guidance to professional engineers in common situations. Nevertheless, there are many difficult or ambiguous situations in which the best ethical solution is difficult to determine.
This 2 PDH online course is intended primarily for engineers seeking to learn ethical principles and how to apply them to their professional practice.
This PE continuing education course is intended to provide you with the following specific knowledge and skills:
-
Determining ethical behavior using several philosophical models
-
Evaluating a practical situation in terms of a professional code of ethics
-
Identifying situations that represent conflicts of interest and formulate a proper response
-
Applying the standards of professional ethics in technical communication
-
Recognizing environmental impacts of engineering work
-
Considering principles of sustainable development in the performance of professional duties
In this professional engineering CEU course, you need to review "Ethics in Professional Practice" published by the American Society of Mechanical Engineers (ASME). (This course document is reproduced by permission of the ASME (www.asme.org). You may also download from or view this course document on the ASME's website by clicking on Ethics in Professional Practice).
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credit. The quiz will be based on this ASME publication.
Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.