Missouri Structural 30 PDH Discount Package 1

This online engineering PDH course provides an overview of the issues that should be considered before the building is designed. Specifically, it provides an understanding of the natural hazards a coastal building may be exposed to and guidance on concepts for designing a more hazard-resistant residential building.

 

Coastal development has increased in recent years, and some of the sites that are chosen for development have higher risks of impact from natural hazards than in the past. Examples of sites with higher risks are those that are close to the ocean, on high bluffs that are subject to erosion, and on artificial fill deposits. In addition, many of the residential buildings constructed today are larger and more costly than before, leading to the potential for larger economic losses if disaster strikes. However, studies conducted by the Federal Emergency Management Agency (FEMA) and others after major coastal disasters have consistently shown that coastal residential buildings that are properly sited, designed, and constructed have generally performed well during natural hazard events.

 

This 2 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides the design professional and others with guidance on how to determine, by calculation or graphical interpretation, the magnitude of the loads placed on a building by a particular natural hazard event or a combination of events. The calculation methods presented in this course are intended to serve as the basis of a methodology for applying the calculated loads to the building during the design process.

 

All coastal residential buildings should be designed and constructed to prevent flotation, collapse, or lateral movement due to the effects of wind and water loads acting simultaneously. Throughout this course, the recommendations of the engineering standards ASCE 7-10, Minimum Design Loads for Buildings and Other Structures (ASCE 2010) will be followed unless otherwise noted. ASCE 7-10 includes procedures for calculating dead and live loads; loads due to soil pressure, fluids, wind, snow, atmospheric ice, and earthquake; and load combinations.

 

This 5 PDH online course is intended for structural engineers, design and construction personnel, and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides the design professional with sufficient background and examples for effectively designing a residential building proposed to be constructed in a coastal hazard area. The designer will find that engineering judgment will need to be applied to a range of issues which will arise during the design of a coastal residential building. This course describes the design process which involves the following:

• Determining design loads
• Determining the building’s foundation, structural frame, and envelope
• Determining the connections between individual elements
• Determining the elevation, placement, and support for utilities
• Selecting the appropriate materials

 

In this course, the recommended design method is Allowable Stress Design (ASD), so there are factors of safety (FS) built into the development of the material stresses and the forces at the connections. This design method has been chosen for this manual because ASD continues to be the predominant design method in light-frame, residential, wood construction.

 

This 5 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides guidance on designing foundations, including selecting the appropriate materials, in coastal areas.

 

Design considerations for foundations in coastal environments are in many ways similar to those in inland areas. Like all foundations, coastal foundations must support gravity loads, resist uplift and lateral loads, and maintain lateral and vertical load path continuity from the elevated building to the soils below. Foundations in coastal areas are different in that they must generally resist higher winds, function in a corrosive environment, and withstand the environmental aspects that are unique to coastal areas, such as storm surges, rapidly moving floodwaters, wave action, and scour and erosion. These aspects can make coastal flooding more damaging than inland flooding.

 

This 4 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides guidance on the design of the building envelope in the coastal environment. The building envelope comprises exterior doors, windows, skylights, exterior wall coverings, soffits, roof systems and attic vents. In buildings elevated on open foundations, the floor is also considered a partof the envelope.

 

High wind is the predominant natural hazards in the coastal environment that can cause damage to the building envelope.Other natural hazards also exist in some localities. These may include wind-driven rain, salt-laden air, seismic events, hail and wildfire. The vulnerabilities of the building envelope to these hazards are discussed in this course, and recommendations on mitigating them are provided.

 

This 4 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

 

This online engineering PDH course provides guidance on the design considerations for installing mechanical equipment and other utilities in coastal construction areas.

 

Protecting mechanical equipment and utilities is a key component of successful building performance during and after a disaster event. These equipment and utilities include: elevators, exterior-mounted and interior mechanical equipment, and electric, telephone, and cable TV systems and water and wastewater systems.

 

This 1 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course discusses constructing buildings, including foundation, framing, building envelop, and electrical and mechanical equipment, in coastal areas. Individual sections cover construction items that will probably require the most care or attention on the part of the builder in order for the design intent to be achieved. Builders may find that the permitting and inspection procedures in coastal areas are more involved than those in inland areas. Not only must all Federal, state, and local Coastal Zone Management and other regulatory requirements be met, the design plans and specifications may need to be sealed by a design professional.

 

Construction of residential buildings in coastal zones presents challenges to the builder not usually found in more inland locations. For all coastal residential buildings, these challenges may include the following:

• Connection details require additional inspections
• The need for careful surveying to place the building within property line setbacks and above The Design Flood Elevation (DFE)
• The additional care required to ensure that all elements of the building will withstand the large forces associated with high wind speeds and coastal flooding
• The additional care that must be taken in constructing a building envelope that will withstand the intrusion of air and moisture under the effects of high wind speeds
• The difficulty of providing durable exterior construction in a moist, sometimes salt-laden, environment
• The requirement to protect and, usually, place utilities above the DFE

 

In constructing coastal residential buildings on elevated pile foundations, builders face additional challenges:

• The difficulty of constructing a driven pile foundation to accepted construction plan tolerances
• The difficulty of building on an elevated post-and-beam foundation, compared to building on continuous wall foundations

 

This 4 PDH online course is applicable to structural engineers, design and construction personnel, and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides guidance on maintaining the building structure and envelope in coastal construction areas.

 

For maximum performance of a building in a coastal area, the building structure and envelope must not be allowed to deteriorate. Long-term maintenance and repair demands are influenced directly by decisions about design, materials and construction methods during building design and construction. Using fewer durable materials will increase the frequency and cost of required maintenance and repair. The design and detailing of various building systems also significantly influence maintenance and repair demands.

 

This 1 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides guidance on retrofitting existing residential structures to resist or mitigate the consequences of natural hazards in the coastal environment.

 

The natural hazards that are addressed are wildfires, seismic events, floods and high winds. Specific retrofitting methods and implementation are discussed briefly, and resources with more in-depth information are provided. For retrofitting to mitigate high winds, the new three-tiered wind retrofit program that is provided in FEMA P-804, Wind Retrofit Guide for Residential Buildings (FEMA 2010c), is discussed. The program includes systematic and programmatic guidance.

 

This 2 PDH online course is intended for structural engineers, design and construction personnel and other technical professionals who are involved in coastal construction projects.

This online engineering PDH course provides guidance on the basic biological structure of wood and provides a basis for interpreting its properties in an engineering context. By understanding the function of wood in the living tree, we can better understand the strengths and limitations it presents as a material.

 

Wood is a complex biological structure, a composite of many chemistries and cell types acting together to serve the needs of a living plant. Attempting to understand wood in the context of wood technology, we have often overlooked the key and basic fact that wood evolved over the course of millions of years to serve three main functions in plants― conduction of water from the roots to the leaves, mechanical support of the plant body, and storage of biochemicals. There is no property of wood—physical, mechanical, chemical, biological, or technological—that is not fundamentally derived from the fact that wood is formed to meet the needs of the living tree. To accomplish any of these functions, wood must have cells that are designed and interconnected in ways sufficient to perform these functions. These three functions have influenced the evolution of approximately 20,000 different species of woody plants, each with unique properties, uses, and capabilities, in both plant and human contexts.

 

This 2 PDH online course is applicable to civil, structural or geotechnical engineers, as well as design and construction personnel who are interested in gaining a better understanding of the structures and functions of wood or who are involved in the design and planning of wood structures.