Alabama Stormwater 30 PDH Discount Package 3

This online engineering PDH course introduces the reader to the development of construction site Stormwater Pollution Prevention Plans (SWPPP). A SWPPP is required for coverage under the National Pollutant Discharge Elimination System (NPDES) Construction Site General Permit.

Development inevitably causes some degree of disturbance and compaction of the soil, the loss of vegetation density, impacts to natural habitats and the creation of impervious surfaces.  All too often ordinances requirements result in a site layout that does not take into consideration the most valuable aspects of a site.  Water quality, habitat, and critical ecological features can be lost if sites are fit to a development, rather than fitting a development to a site.

The most critical requirement of the NPDES permit is the preparation and implementation of a SWPPP. The NPDES program has specific requirements for items that must be addressed in a SWPPP. Understanding the requirements for the creation and implementation of a SWPPP is essential to staying in compliance with the law. The SWPPP serves many functions: NPDES permit conditions require it, it provides documentation of compliance, and ultimately if properly designed and implemented it provides the direction to reduce water quality impacts.

This 5 PDH online course is applicable to practicing engineers, contractors, developers, regulators, and all other personnel involved with construction sites.

This online engineering PDH course presents EPA's stormwater best management practice for the protection of wetlands and aquatic ecosystems and conservation of water.

Municipal operations can adversely affect the water quality system due to pollutant runoff from various activities such as park and open space maintenance, fleet and building maintenance, new construction and land disturbances, and storm water system maintenance.

EPA recognizes that storm water pollution resulting from municipal activities can be prevented or reduced by implementing an effective storm water operations and maintenance program. Therefore the EPA published the Storm Water Phase II Rule on December 8, 1999, that describes a menu of Best Management Practices (BMP). “Pollution Prevention/Good Housekeeping for Municipal Operations” is one of the Best Management Practices that requires operators of small MS4s in urbanized areas to implement a storm water management program for the protection of wetlands and aquatic ecosystems, improved quality of receiving water bodies, conservation of water resources, flood control, and protection of public health.

This 2 PDH online course is applicable to municipality owners and/ or operators, construction contractors/workers, site developers, engineers, managers, and all other personnel involved in the implementation of good housekeeping practices (materials management) for municipal operations.

This online engineering PDH offers steps for planning how to prevent and contain stormwater pollution. It offers a step by step guide on what should be included in the plan, as well as helpful tips for how the plan can be maintained, adhered to, and exceeded in order to ensure a high level of quality.

Stormwater runoff is water from rain or snowmelt that does not immediately infiltrate into the ground and flows over or through natural or man-made storage or conveyance systems. When undeveloped areas are converted to land uses with impervious surfaces such as buildings, parking lots, and roads, the natural hydrology of the land is altered and can result in increased surface runoff rates, volumes, and pollutant loads.

This course provides useful tips about maintaining a SWPPP, as well as examples of and foresight into what can go wrong with various different kinds of materials which are commonly found at industrial sites. This includes solids, liquids, and waste. It also provides useful information on how to effectively and efficiently handle stormwater discharge in the event that control measures fail, and information on monitoring pollutants in stormwater discharge.

This online enineering PDH course explains how to derive the pipe diameter and slope for each length of storm sewer and the depth to the pipe bottom at each manhole.The overall procedure and each step will be presented and discussed.  Example calculations for a single length of storm sewer between two manholes will be performed and an example of calculations between successive manholes will be done using Excel.

Storm sewers are widely used to carry away runoff from storms, primarily in urban areas.  The hydraulic design begins after the locations of the manholes for the system have been determined. Between each pair of manholes the storm sewer will have a constant slope and diameter. The hydraulic design process results in determination of an appropriate diameter and slope for each length of storm sewer and determines the depth of the bottom of the pipe at each manhole.

This 4 PDH online course is intended for hydrologists, civil engineers, hydraulic engineers, highway engineers and environmental engineers. After completing this course, you will be able to carry out hydraulic design of storm sewers to determine diameter, slope and depth of invert at each manhole for the length of storm sewer between two successive manholes.  After completing this course, you will also be able to set up an Excel program to carry out hydraulic design for successive lengths of storm sewer.

This online engineering PDH course describes basic design principles of embankment and excavation ponds as well as construction requirements.  Other topics include: water needs, preliminary soil investigations, watershed & stormwater runoff estimation, basin sealing, spillways and inlets, and operation & maintenance.

This 5 PDH online course is intended for hydrologists, civil engineers, agricultural engineers, construction engineers, municipal engineers, geotechnical engineers and environmental engineers.  An attendee of this course will gain knowledge about planning, design, and construction of embankment and excavated ponds.

This online engineering PDH course provides design guidance for BMPs referred to as vegetative biofilters.  Three different types of these on-site BMPs are described in this course and include grass swales, vegetated filter strips and bioretention cells.

The goals and objectives of best management practice (BMP) for stormwater management are as diverse as the situations to which they are applied.

This 10 PDH online course is applicable to civil and geotechnical engineers, site developers, and contractors as well as design and construction personnel involved with the planning and design of stormwater systems.