Online Courses

Discount Packages

Ethics, Laws and Rules

Live Webinars

Video Presentations

Interactive Courses

OH Timed & Monitored

Courses by Provider

Texas Materials and Ethics 15 PDH Discount Package 1

PACKAGE NO: TX15T-06
PACKAGE PDH: 15
PACKAGE PRICE: $216
To buy the package, please click on:
Courses in this Package
COURSE TITLE: Corrosion: Overview
COURSE NO: H04-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Corrosion: Overview
Course Highlights

This online engineering PDH course provides basic information on the chemical interaction taking place during the corrosion process between the environment and the corroding metal. It also describes preventive measure to minimize or control the corrosion process.

 

Uncontrolled corrosion can cause many serious problems. Corrosion occurs continuously, and every metal in every facility is subject to some type of corrosion. Even though corrosion cannot be eliminated, it can be controlled.

 

This 4 PDH  online course is applicable to chemical and environmental engineers, design and construction personnel, technical staff and facility operators who are interested in gaining a better understanding of the theory of corrosion.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Corrosion theory
  • General corrosion
  • Crud and galvanic corrosion
  • Specialized corrosion
Course Document

In this professional engineering CEU course, you need to review Module 2, "Corrosion" of the Department of Energy Publication DOE-HDBK-1015/1-93, "Chemistry".

To view, print and study the course document, please click on the following link(s):
Corrosion - Overview (1 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of twenty (20) questions to earn 4 PDH credits. The quiz will be based on Module 2 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Structures and Properties of Metals
COURSE NO: T07-001
COURSE PROVIDER: Elie Tawil, P.E., LEED AP
Structures and Properties of Metals
Course Highlights

The online engineering PDH course addresses two aspects of metals. The first part of this course deals with the basic structures of metals and how those structures are affected by various processes. In addition, it contains information on the various imperfections and defects that the metal may sustain and how they affect the metal. The second part contains information on metal properties which are considered when selecting material for engineering design purposes. Each of these properties contains a discussion on how the property is affected and the metal's application.

 

This 7 PDH online course is applicable to structural and mechanical engineers, construction and design personnel, technical staff and facility operators who are interested in gaining a better understanding of the structures and properties of metals.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Understanding bonding
  • Learning about common lattice types
  • Understanding grain structure and boundary
  • Learning about polymorphism and alloys
  • Knowing the imperfection in metals
  • Learning about stress and strain and Young's
  • Modulus Understanding stress-strain relationship
  • Understanding the physical properties of materials
  • Learning about working metals and corrosion
  • Understanding hydrogen embrittlement
Course Document

In this professional engineering CEU course, you need to review Modules 1 and 2, "Structures and Property of Metals" of the Department of Energy Publication DOE-HDBK-1017/1-93, "Material Science".

To view, print and study the course document, please click on the following link(s):
Structures and Properties of Metal (1.5 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of thirty five (35) questions to earn 7 PDH credits. The quiz will be based on Modules 1 and 2 of this DOE publication.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Thermal Stress and Brittle Fracture of Material
COURSE NO: T02-001
COURSE PROVIDER: Gilbert Gedeon, P.E.
Thermal Stress and Brittle Fracture of Material
Course Highlights

This online engineering PDH course addresses the effects of thermal stress and thermal shock on a system. It explains how thermal stress and shock combined with pressure can cause major damage to components. This course also addresses ductile and brittle fracture. It describes how ductile and brittle fractures are affected by the minimum pressurization and temperature curves. It also explains the reason why heatup and cooldown rate limits are used when heating up or cooling down a system.

 

This 2 PDH online course is applicable to structural and mechanical engineers, construction and personnel, technical staff and facility operators who are interested in gaining a better understanding of thermal stress and brittle fracture of materials.

Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Thermal stress
  • Pressurized thermal shock
  • Brittle fracture mechanism
  • Minimum pressurization-temperature curves
  • Heatup and cooldown rate limits
Course Document

In this professional engineering CEU course, you need to review Modules 3 and 4, "Thermal Stress and Brittle Fracture" of the Department of Energy Publication DOE-HDBK-1017/1-93, "Material Science".

To view, print and study the course document, please click on the following link(s):
Thermal Stress and Brittle Fracture of Material (478 KB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of ten (10) questions to earn 2 PDH credits. The quiz will be based on Modules 3 and 4 of this DOE publication.

 

The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

COURSE TITLE: Engineering Laws, Rules and Ethics for Texas Professional Engineers
COURSE NO: TX2-007
COURSE PROVIDER: Gilbert Gedeon, P.E.
Engineering Laws, Rules and Ethics for Texas Professional Engineers
Note: This 2 PDH engineering ethics course is applicable only to Texas Professional Engineers. It is also offered as a 1 PDH recorded video presentation and as a 1 PDH live interactive webinar.
Accepted in:
Course Highlights

This online engineering PDH presents excerpts of the statutory laws and rules governing the practice of engineering in the State of Texas as stipulated in Title 22, Part 6 of the Texas Administrative Code, including proper use of the engineer’s seal, compliance, enforcement and more. 

 

This continuing education course also presents the Texas laws and rules of ethics and professional responsibility for engineers to understand and apply when they are frequently faced with different moral dilemmas while practicing their profession. The rules of professional conduct will provide moral and ethical guidance to engineers in their decision making process. Most importantly, it will provide engineers with insight on how to respect and protect their engineering practice with the utmost professionalism.

 

This 2 PDH online course is applicable to Professional Engineers licensed in the State of Texas and who are required to demonstrate continuing professional competency in engineering laws, rules and ethics as a condition of their license renewal. For each renewal period, every licensee must complete fifteen (15) professional development hours, at least one (1) of which must be relative to the Texas Laws and Rules, or to the rules of professional responsibility, conduct and ethics.
Learning Objectives

This PE continuing education course is intended to provide you with the following specific knowledge and skills:

  • Familiarizing with the laws and rules regulating the practice of engineering in the State of Texas
  • Understanding the roles of the Texas Board and its disciplinary authority
  • Learning about the proper use of seal, compliance and enforcement in the State of Texas
  • Understanding the Texas Board disciplinary process
  • Learning about engineering ethics and the rules of professional conduct and responsibility
  • Gaining an overview of ethical and disciplinary case studies depicting various violations and their corresponding penalties
Course Document
In this professional engineering CEU course, you need to review the course document titled, “Engineering Laws, Rules and Ethics for Texas Professional Engineers”.
To view, print and study the course document, please click on the following link(s):
ENGINEERING LAWS, RULES AND ETHICS FOR TEXAS PROFESSIONAL ENGINEERS (1.76 MB)
Course Quiz
Once you complete your course review, you need to take a multiple-choice quiz consisting of fifteen (15) questions to earn 2 PDH credits. The quiz will be based on the entire document.
The minimum passing score is 70%. There is no time limit on the quiz, and you can take it multiple times until you pass at no additional cost.
Certificate of Completion

Upon successful completion of the quiz, print your Certificate of Completion instantly. (Note: if you are paying by check or money order, you will be able to print it after we receive your payment.) For your convenience, we will also email it to you. Please note that you can log in to your account at any time to access and print your Certificate of Completion.

To buy the package , please click on: