Kansas Geotechnical & Health/Safety/Welfare 30 PDH Discount Pkg 2

This online engineering PDH course focuses on the Accessible Routes of the  2010 ADA standards for accessible design.  

The Department of Justice published revised regulations for Titles II and III of the Americans with Disabilities Act of 1990 "ADA" in the Federal Register on September 15, 2010. These regulations adopted revised, enforceable accessibility standards called the 2010 ADA Standards for Accessible Design "2010 Standards" or "Standards". The 2010 Standards set minimum requirements – both scoping and technical – for newly designed and constructed or altered State and local government facilities, public accommodations, and commercial facilities to be readily accessible to and usable by individuals with disabilities.

This online engineering PDH course provides detailed information on designing accessible parking spaces that meet the requirements of the Americans with Disabilities Act as defined by the 2010 ADA Standards for Accessible Design.

Both vans and cars are considered.  Dimensions, distribution, location, connections to access routes (to accessible entrances to buildings), and minimum number of spaces are all described.  Special requirements for making temporary events (such as street festivals, craft fairs, musical performances, sporting events and home shows) accessible are also presented.

This online engineering PDH course provides general guid­ance to help business owners understand how to comply with the Department of Justice’s Americans with Disability Act (ADA) and the 2010 Standards, the design standards for accessible buildings.

The ADA applies to both the built environment and to policies and procedures that affect how a business provides goods and services to its customers. Using this guidance, small business owners or managers can ensure that they will not unintentionally exclude people with disabilities and will know when they need to remove barriers in existing facilities.

This 1 PDH online course is intended for engineers involved in the planning, design or operation of a small business.

This online engineering PDH course provides general guid­ance to assist State and local governments in understanding and complying with current Americans with Disabilities Act (ADA) require­ments.

The Department of Justice revised its regulations implementing the ADA in September 2010. The new rules clarify issues that arose over the previous 20 years and contain new requirements, including the 2010 ADA Standards for Accessible Design (2010 Standards).

This 1 PDH online course is intended for engineers employed by State or local governments.

This online engineering PDH course will establish the relationship between the actions of a licensing board for professional engineers and the Constitutional right of free speech.

This course discusses the background and findings of a legal case that arose when a state licensing board for professional engineers attempted to restrict the right of an engineer from speaking about a public safety issue. Actual legal documents and associated correspondence are discussed, and their implications analyzed.

This online engineering PDH course presents an overview of the Criminal Enforcement Program of the Environmental Protection Agency.  The purpose of the Program is to investigate, help prosecute, and deter the most egregious environmental offenders.

Environmental laws include criminal provisions that address knowing and negligent environmental violations.  Criminal enforcement brings to bear the possibility of incarceration and monetary fines that are EPA’s strongest sanctions.  The course discusses these aspects of the Program and in addition describes sixteen landmark cases in environmental law. The seriousness of the subject of the course is illustrated by the Congressional testimony of an EPA administrator: “While both corporations and individuals pay penalties, only individuals can go to prison – a sanction that no one can pass along to the American consumer as just another cost of doing business.”

This 4 PDH online course is intended for engineers charged with the responsibility of ensuring that their organization obeys EPA environmental laws.

This online engineering PDH course describes the hazards of electrical work and basic approaches to working safely.

Whenever working with power tools or on electrical circuits, there is a risk of electrical hazards, especially electrical shock. Anyone can be exposed to these hazards at home or at work. Workers are exposed to more hazards because job sites can be cluttered with tools and materials, fast-paced, and open to the weather. Risk is also higher at work because many jobs involve electric power tools.

Electrical trades workers must pay special attention to electrical hazards because they work on electrical circuits. Coming in contact with an electrical voltage can cause current to flow through the body, resulting in electrical shock and burns. Serious injury or even death may occur. As a source of energy, electricity is used without much thought about the hazards it can cause. Because electricity is a familiar part of our lives, it often is not treated with enough caution. As a result, an average of one worker is electrocuted on the job every day of every year! 

This online engineering PDH course addesses Personal Protective Equipment (PPE) types, selection and training, as well as conducting a hazard assessment of the workplace.

Hazards exist in every workplace in many different scenarios: sharp edges, falling objects, flying sparks, chemicals, noise and a myriad of other potentially dangerous situations. Controlling a hazard at its source is the best way to protect employees. Depending on the hazard or workplace conditions, OSHA recommends the use of engineering or work practice controls to manage or eliminate hazards to the greatest extent possible. Therefore, OSHA developed the Personal Protection Equipment Standard to protect employees from workplace hazards that can cause injury.

This 3 PDH online course is applicable to all engineers, employers, building owners, facility managers, and all personnel working on construction projects.

This online engineering PDH course provides guidance on the requirements for excavation and trenching operations. This course describes safe work practices that can protect workers from cave-ins and other hazards.

Trenching and excavation work presents serious hazards to all workers involved. Cave-ins pose the greatest risk and are more likely than some other excavation-related incidents to result in worker fatalities. One cubic yard of soil can weigh as much as a car. An unprotected trench can be an early grave. Employers must ensure that workers enter trenches only after adequate protections are in place to address cave-in hazards.  Other potential hazards associated with trenching work include falling loads, hazardous atmospheres and hazards from mobile equipment. Following the requirements of OSHA Excavation standards will prevent or greatly reduce the risk of cave-ins and other excavation-related incidents.

This online engineering PDH course summarizes OSHA's regulations related to underground construction.

The construction of underground tunnels, shafts, chambers, and passageways are essential yet dangerous activities. Working under reduced light conditions, difficult or limited access and egress, with the potential for exposure to air contaminants and the hazards of fire and explosion, underground construction workers face many dangers. OSHA recognizes that working in underground environments presents serious hazards to all workers involved. Therefore OSHA developed the underground construction standard to protect the safety and health of underground construction workers.

This 3 PDH online course is applicable to employers/business owners, engineers, managers, construction workers and all other personnel involved with underground construction projects.

This online engineering PDH course is an introduction to the methods of evaluating the stability of shallow and deep excavations. You will learn about the two basic types of excavations: "open excavations" where stability is achieved by providing stable side slopes, and "braced excavations" where vertical or sloped sides are maintained with protective structural systems that can be restrained laterally by internal or external structural elements.  You will be introduced to the methodology for selecting and designing excavation systems including consideration of soil type and strength parameters, groundwater conditions, slope protection, side and bottom stability, vertical and lateral movements of adjacent areas, and effects on existing structures.

This 2 PDH  online course is intended for civil, structural and geotechnical engineers and other design and construction professionals interested to learn the fundamentals of excavation in soils for stability and safety, as they relate to open cut excavations, trenching, rock excavation, excavation stabilization and safety, embankment cross-section design, and borrow excavation.

This online engineering PDH course provides guidance for analyzing the static stability of slopes of earth and rock-fill dams, slopes of other types of embankments, excavated slopes, and natural slopes in soil and soft rock.

Slope stability criteria are presented for strength tests, analysis conditions, and factors of safety. The criteria are intended to be used with methods of stability analysis that satisfy all conditions of equilibrium. Methods that do not satisfy all conditions of equilibrium may involve significant inaccuracies and should be used only under the restricted conditions described herein.

This 4 PDH online course is applicable to geotechnical and structural engineers, as well as design and construction personnel working on projects involving slope stability analysis.